ANSI SCTE 84-3-2017 pdf free download – HMS Inside Plant Management Information Base (MIB) SCTE-HMS-HE-FAN-MIB.
This document is identical to SCTE 84-3 2009 except for informative components which may have been updated such as the title page, NOTICE text, headers and footers. No normative changes have been made to this document.
This document provides the branch object identifiers for each of the Fan MIBs within the SCTE HMS Tree.
COPYRIGHT
The MIB definition found in this document may be incorporated directly in products without further permission from the copyright owner, SCTE.
NORMATIVE REFERENCE
IETF RFC 1907 SNMPv2-MIB
IETF RFC 2578 SNMPv2-SMI
IETF RFC 2579 SNMPv2-TC
IETF RFC 2580 SNMPv2-CONF
IETF RFC 2737 ENTITY-MIB
SCTE 36 SCTE-ROOT
SCTE 37 SCTE-HMS-ROOTS
SCTE 38-11 SCTE-HMS-HEADENDIDENT-MIB
SCTE 38-1 SCTE-HMS-HE-PROPERTY-MIB
SCTE 84-1 SCTE-HMS-HE-COMMON-MIB
INFORMATIVE REFERENCE
None
TERMS AND DEFINITIONS
This document defines the following terms:
Management Information Base (MIB) – the specification of information in a manner that allows standard access through a network management protocol.
REQUIREMENTS
This section defines the mandatory syntax of the SCTE-HMS-HE-FAN-MIB. It follows the IETF Simple Network Management Protocol (SNMP) for defining managed objects.The syntax is given below.
SCTE-HMS-HE-FAN-MIB DEFINITIONS ::= BEGIN IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, Unsigned32 FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF entPhysicalIndex
FROM ENTITY-MIB heFans, HeMilliAmp, HeFaultStatus
FROM SCTE-HMS-HEADENDIDENT-MIB;
heFanModuleMIB MODULE-IDENTITY
LAST-UPDATED “200403250410Z” ORGANIZATION
“SCTE HMS Working Group” CONTACT-INFO
“SCTE HMS Subcommittee, Chairman mail to: standards@scte.org”
DESCRIPTION
“The MIB module is for representing Fans and Fan Groupings present in the headend (or indoor) plant which are supported by a SNMP agent.”
::= { heFans 1 }
heFanMIBObjects OBJECT IDENTIFIER ::= { heFanModuleMIB 1 }
— Conformance information
heFanMIBConformance OBJECT IDENTIFIER ::= { heFanModuleMIB 2 }
heFanMIBCompliances OBJECT IDENTIFIER ::= { heFanMIBConformance 1 }
heFanMIBGroups OBJECT IDENTIFIER ::= { heFanMIBConformance 2 }
— The Fan Unit Table
heFanUnitTable OBJECT-TYPE
SYNTAX SEQUENCE OF HeFanUnitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
“A table containing information about headend (or indoor) fan groupings. Fans can be in a Fan Tray, Power Supplies, attached to the Cabinet, or any fan entity managed by this SNMP agent. Each fan grouping will have an associated entry in the Entity mib.”ANSI SCTE 84-3 pdf download.